Modèle 880
878B, 879B, & 880
Pont RLC Portable, 100kHz
Price: €500.00 / 3 yr Warranty
Name | Qty | Last Updated | ||
---|---|---|---|---|
TEST EQUIPMENT DEPOT (FOTRONIC) | 13 | 2024-10-30 | ||
FARNELL | 35 | 2024-10-30 | ||
TESTEQUITY | 10 | 2024-10-30 | ||
NEWARK | 27 | 2024-10-30 | ||
TME | 4 | 2024-10-30 | ||
DISTRELEC | 2 | 2024-10-30 | ||
DIGI-KEY | 10 | 2024-10-30 | ||
MOUSER ELECTRONICS | 8 | 2024-10-28 | ||
RS Components | 43 | 2024-10-11 |
Généralités
Le pont RLC portable 880 vous offre les spécifications d'un appareil de laboratoire et permet toutes les mesures sur les composants, jusqu'à 100kHz. En plus des mesures traditionnelles, le BK880 calcule les valeurs d'ESR et de DCR. Livré avec des accessoires très pratiques (cordons Kelvin et pinces pour composants CMS), il s'adapte à toutes les situations! Principales caractéristiques et fonctions:
- Testeur de composants polyvalent : inductance, résistance, capacité - (R, L, C, Z)
- Affichage 4 digits 1/2 (40 000 points)
- Précision de base de 0,1%
- Affichage simultané des paramètres D et Q grace au double afficheur LCD
- Mesure de l'ESR, du DSR et de l'angle
- Fréquence de test 100Hz, 120Hz, 1KHz, 10KHz, 100kHz
- Tension de test: 0.3Veff., 0.6Veff. et 1Veff.
- Afficheur LCD rétro - éclairé
- Fonction Hold
- Mode relatif
- Mode tolérance pour le tri des composants
- Mode détection automatique de L, C, R
- Interface USB et instructions compatibles SCPI
- Livré avec des pinces de test Kelvin et un jeu de pince pour composants CMS (TL8SM)
- Garantie de 3 ans
Modèles
Documents
Documentation
Logiciels
Description |
Version |
Téléchargement |
---|---|---|
USB Virtual COM Drivers (Supports Windows 10/11)
|
V11.3.0
|
|
Operating Software (Supports Windows(R) Vista/7/10)
|
V3.0.1
|
Accessoires
Test leads for handheld LCR meters (Sheathed)
TL LCR
- Includes one red and one black lead
- 5" Long sheathed banana to alligator clip
- Short length allows for accurate component measurements
- Used with LCR Meters and Capacitance Meters
DMM Carrying Case
LC 29B
- Light weight, durable Cordura nylon Protects your instruments
- Made in the U.S.A.
- Room to hold your test leads
- Approximate Internal Dimensions: 4" x 2.5" x 8" (102 x 64 x 203mm)
120VAC Wall Adapter with output of 12VDC/150mA, Center +
BE800
120VAC Wall adapter used as a battery eliminator to power compatible instruments without using battery power. Output plug dimensions are: length: 10.5mm, outer diameter: 4mm, inner diameter: 1.5mm
- One is included with the model 879B
230VAC European Two Prong Wall Adapter with output of 12VDC/150mA, Center +
BE802
230VAC Wall adapter used as a battery eliminator to power compatible instruments without using battery power. Output plug dimensions are: length: 10.5mm, outer diameter: 4mm, inner diameter: 1.5mm
SMD Tweezer Probe
TL8SM
The TL8SM is a tweezer probe that is useful when measuring surface mount capacitors, inductors, and resistors. Cable length is approximately 16 inches (40.64 cm). When used with the 880, the guarded lead reduces the effect of lead impedances and contact resistance thus minimizing measurement errors and improving accuracy especially in the lower impedance range. The TL8SM is an included accessory with the model 880.
4 Terminal shielded Kelvin test lead
TL8KC1
The TL8KC1 is a Kelvin test lead that is useful when measuring leaded capacitors, inductors, and resistors. Cable length is approximately 16 inches (40.64 cm). When used with the 880, the guarded lead reduces the effect of lead impedances and contact resistance thus minimizing measurement errors and improving accuracy especially in the lower impedance range. The TL8KC1 is an included accessory with the model 880.