Model 8542B
8500B Series
150 W Programmable DC Electronic Load
Price: $1015 / 3 yr Warranty
| Name | Qty | Last Updated | ||
|---|---|---|---|---|
| TME | 2 | 2024-11-26 | ||
| SEFRAM | 5 | 2024-11-26 | ||
| NEWARK | 1 | 2024-11-26 |  |
|
| FARNELL | 5 | 2024-11-26 | ||
| TESTEQUITY | 5 | 2024-11-26 | |
|
| RS Components | 3 | 2024-11-26 | ||
| DIGI-KEY | 5 | 2024-11-26 | |
|
| DISTRELEC | 1 | 2024-11-26 | ||
| VALUETRONICS | 1 | 2024-11-26 | |
|
| MOUSER ELECTRONICS | 3 | 2024-11-25 | |
|
| TEST EQUIPMENT DEPOT (FOTRONIC) | 1 | 2024-11-21 | |
Overview
The 8500B Series programmable DC electronic loads improve upon all aspects of its predecessor while maintaining dependability at a value price. This series supports both SCPI and the backwards compatible legacy protocol.
With a transient mode speed of up to 10 kHz and multi-type input terminals for banana plug or spade connectors, these DC loads are suitable for testing and evaluating DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.
- Maximum input power up to 1500 W
- CC/CV/CR/CW operating modes
- Transient mode up to 10 kHz in CC mode
- 16-bit voltage and current measurement system with up to 0.1 mV / 0.1 mA resolution
- List mode and adjustable slew rate in CC mode
- Short circuit test
- Built-in battery test function with voltage level, capacity level, and timer stop conditions
- CR-LED mode to simulate the loading behavior of typical LEDs
- Remote voltage sensing to compensate for the effect of voltage drop in wires
- Analog current control and monitoring
- TTL (DB9) interface, includes TTL to USB adapter (models 8542B, 8500B, 8502B, 8510B)
- USB and RS232 interfaces (8514B only)
- OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
For more information click here.
Models
Documents
Documentation
Software
|
Description |
Version |
Download |
|---|---|---|
|
Battery Test Software
|
1.8.1
|
|
|
Battery Test Software w/ LabVIEW 2022 Run-Time Engine
|
1.8.1
|
|
|
Operating Software
|
1.1.22
|
|
|
Operating Software w/ LabVIEW 2022 Run-Time Engine
|
1.1.22
|
|
|
IT-E132 and IT-E132B USB Cable Adapter Driver
|
v1.14.0
|
|
|
LabVIEW 2018 SP1 Drivers
|
1.0.3
|
|
|
DC Load Operating Software w/ LabVIEW 2024 Run-Time Engine
|
1.0.4
|
|
|
Operating Software
|
1.0.4
|
Accessories
USB to TTL Interface
IT-E132B
This is the USB to TTL interface replacement part that was originally included with its paired product. A standard USB cable is included.
- MSRP: $66
Rack mount kit for select models
IT-E151
The IT-E151 is for rack mounting of compatible products in either a side-by-side configuration or single unit configuration where a provided blank is used to fill the empty space. The dimensions for the kit are 5.24" (133mm) by 19" (482.6mm).
Compatible models:
| - 1785B Series | - 8512 |
| - 9120A Series | - 8514 |
| - 9150 Series | - 8518 |
| - 9130B Series | - 8600 |
| - 8542B | - 8601 |
| - 8500/B | - 8602 |
| - 8502/B | - 9801 |
| - 8510/B | - 9200 Series |
- MSRP: $99
High current premium test lead accessory
TLPWR1
High quality red and black cable with externally braided wrap with large fork-type spade connectors for connecting to high current power supplies or DC loads.
- Length: 2 m
- Rated current: 60 A
- Gauge: 8 AWG
- Connector inner diameter: 8 mm (approximate)
- Connector outer width: 15 mm (approximate)
- Wire material: flexible silicon jacket
- MSRP: $115
RS232 to TTL Interface Kit
IT-E131B
This is the RS232 to TTL interface kit includes both the RS232 to TTL adapter and a RS232 DB9 to DB9 cable.
- MSRP: $67
Rack mount kit for select 2U models
RK2US
The RK2US is for rack mounting select 2U models in either a side-by-side configuration or single unit configuration where a provided blank is used to fill the empty space. The shelf-like design offers added support and simplifies instrument mounting. The sides are shaped to optimize airflow for instruments with side cooling fans. Front end mounting hardware is included. See dimensions in the instruction manual.
- MSRP: $148
100 cm Premium Spade Connector Test Lead Set
TLPWR31
High quality red and black cable dual diameter spade connectors for connecting to power supplies or DC loads.
- Length: 1 meter
- Rated current: 30 A
- Connectors: 6/4 mm Spade lug
- Wire material: flexible silicon jacket
- MSRP: $48
200 cm Premium Spade Connector Test Lead Set
TLPWR32
High quality red and black cable dual diameter spade connectors for connecting to power supplies or DC loads.
- Length: 2 meter
- Rated current: 30 A
- Connectors: 6/4 mm Spade lug
- Wire material: flexible silicon jacket
- MSRP: $59
Additional Resources
|
Name |
Description |
|---|---|
|
DC Electronic Load Selection Guide
|