Model 8551
8550 Series
350 W Programmable DC Electronic Load
Price: €1220.00 / 3 yr Warranty
| Name | Qty | Last Updated | ||
|---|---|---|---|---|
| TME | 1 | 2024-11-23 | ||
| FARNELL | 9 | 2024-11-23 | ||
| DIGI-KEY | 1 | 2024-11-23 |  |
|
| VALUETRONICS | 1 | 2024-11-23 | |
|
| TESTEQUITY | 7 | 2024-11-23 | |
|
| MOUSER ELECTRONICS | 15 | 2024-11-22 | |
|
| RS Components | 3 | 2024-11-22 | ||
| SEFRAM | 7 | 2024-11-22 |
Overview
The 8550 Series DC electronic loads provide many features and capabilities typically found in performance instruments, at a value price. Capable of sinking 350 W in a compact benchtop form factor, this series is well equipped for testing and evaluating power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.
Configurable list, transient, and automatic test modes offer dynamically changing load conditions for evaluating a variety of DC sources. The dedicated battery discharge mode simplifies battery testing.
- High power density, up to 350 W in compact 2U half-rack form factor
- Transient mode up to 20 kHz in CC mode
- CC/CV/CR/CW operating modes
- Front panel remote sense
- List mode programming
- Automatic test mode
- Overvoltage (OVP), overcurrent (OCP), Overpower (OPP) protection, remote reverse voltage (RRV), and key-lock function
- Thermostatically-controlled fans for quiet operation
- Short-circuit test
- Configurable battery discharge test
- CR-LED mode to simulate the loading behavior of typical LEDs
- Adjustable voltage/current slew rate
- Front panel USB host port for logging measurement data
- Operating software and battery test software provided
- RS232 and Handler interfaces
Models
Documents
Documentation
Software
|
Description |
Version |
Download |
|---|---|---|
|
Operating Software w/ LabVIEW 2022 Run-Time Engine (Supports Windows(R) 10/11)
|
1.0.2
|
|
|
Operating Software (Supports Windows(R) 10/11)
|
1.0.2
|
|
|
Battery Test Software
|
1.8.1
|
|
|
Battery Test Software w/ LabVIEW 2022 Run-Time Engine
|
1.8.1
|
|
|
LabVIEW 2022 Driver
|
1.0.0
|
Accessories
High current premium test lead accessory
TLPWR1
High quality red and black cable with externally braided wrap with large fork-type spade connectors for connecting to high current power supplies or DC loads.
- Length: 2 m
- Rated current: 60 A
- Gauge: 8 AWG
- Connector inner diameter: 8 mm (approximate)
- Connector outer width: 15 mm (approximate)
- Wire material: flexible silicon jacket
Additional Resources
|
Name |
Description |
|---|---|
|
DC Electronic Load Selection Guide
|