Modèle 2540B
2540B Series
Oscilloscope numérique 60 MHz, 2 voies - 1Gech/s
Price: €Price not found / 3 yr Warranty
DiscontinuedJan 09, 2016
No distributors seem to have what you're looking for in stock. You can try searching again with a different part number or visit our
Généralités
The 2540B has been replaced by the: 2190D
- Bande passante 60 MHz, 2 voies
- Résolution verticale : 8 bits
- échantillonnage 1Gech/s voie et 50 Gech/s en ETS
- Mémoire de 16k points
- 27 mesures automatiques, dont FFT, mode Go-No-Go et opérateurs +, - et x
- Compteur 5 digits intégré
- écran LCD TFT couleur
- Fonction autocalibration
- Interface USB (Host) en face avant + USB (Device) en face arrière
- Interface LAN et RS-232
- Boitier compact
- Rapport performances / prix inégalé
- Note d'application: Utilisation du logiciel COMSOFT
Documents
Documentation
Logiciels
|
Description |
Version |
Téléchargement |
|---|---|---|
|
Firmware Update (v2.03.0F.13.120223D)
|
030712
|
|
|
Operating Software (Supports Windows(R) 7)
|
2.0
|
Accessoires
General Purpose BNC and N Adapter Kit
CC500
General Purpose BNC & N Type Adapter Kit provides a comprehensive range of in-series and between-series BNC and N Type coaxial adapters for basic RF testing and troubleshooting needs. The 12 piece kit, packaged in a convenient foam-lined storage case for easy selection and use, is ideal for all popular instruments. The kit contains the most commonly used BNC and N Type adapters for everyday testing. All components feature 50Ω impedance, gold plated center contacts, and low VSWR to ensure accurate repeatable measurements. Features: BNC & N Type 50Ω Connectors Gold plated center contacts Storage case Applications: Production Testing Stations Service & Repair Facilities Educational Test Benches
PR 37AR Deluxe 10:1 Red Oscilloscope Probe
PR 37AR
Red colored oscilloscope probe body 6/150MHz Bandwidth X1, X10 & REF Switchable attenuation 48" (1.2m) Cable length Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter. IEC61010-2-031
High-Voltage Oscilloscope Probe, 10 kV, 40 MHz
PR-55
If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.
- X1000 Attenuation
- 100 Mohms / 1 pF Input Impedance
- Up to 40 MHz Bandwidth
- 80" (2.0m) Cable Length