Modèle 5492B
5492B and 5492BGPIB
Multimètre de table 120 000 points. Précision de base 0,01%, TRMS AC
Price: €Price not found / 3 yr Warranty
DiscontinuedJul 27, 2021
No distributors seem to have what you're looking for in stock. You can try searching again with a different part number or visit our
Généralités
The 5492B has been replaced by the: 5492C
- Multimètre 120 000 points de mesure
- Précision de base 0.01% V DC
- Mesure de tensions jusqu'à 1000V DC et 750V AC
- Mesure de courants jusqu'à 12A
- TRMS AC (tension et courant)
- Mesure de résistance jusqu'à 120Mohms en 2 ou 4 fils
- Fréquencemètre 5Hz à 1MHz et mesure de période
- Choix de la cadence de mesure (jusqu'à 57 mes/s)
- fonctions dBm, %, MIN, MAX, HOLD, COMP
- Interface USB et RS-232
- Interface IEEE en option à la commande (BK5492BGPIB)
- Programmation compatible SCPI
- Sécurité : 600V CAT II
- Garantie: 3 ans
Documents
Documentation
Logiciels
|
Description |
Version |
Téléchargement |
|---|---|---|
|
USB Virtual COM Drivers (Supports Windows 10/11)
|
V11.3.0
|
|
|
Operating Software (Supports Windows(R) 7)
|
V1.0
|
Accessoires
High Performance Bench DMM Accessory Kit
TL500B
This kit of accessories was assembled to facilitate requirements by high-performance bench digital multimeters (DMM's) users. All the most popular accessories in one kit. The kit offers MiniProbe test probe, with spring-loaded tips, for fine probing; MiniPRO Test Clips for small and MiniFlex Test Clips for micro connections; and for those larger test points, both spade lug and banana plug adapters, two pairs of test leads for 4-wire measurements or calibration hookups, an insulated BNC male to sheathed banana jack adapter, and an insulated SMD Tweezer set for surface-mount component testing.
- Silicone jacketed test lead wire with UL Listing
- MiniProbes w/Spring loaded Stainless Steel Tips
- Packaged in Plastic Case
Kit Contains:
(4) Test Lead 4mm Sheathed P-RaP Silicon 0.75, 40": (2) Black, (2) Red
(2) Spring Tip Mini-Probe-4mm Jack: (1) Black, (1) Red
(1) Insulated BNC male Adapt-4mm Safety Jacks
(2) Adapter 4mm Banana Plug to Jack: (1) Black, (1) Red
(2) Mini Flex Clip-4mm Jack-Silicon 0.40, 10 cm: (1) Black, (1) Red
(2) Adapter 6mm Spade 4mm-Jack: (1) Black, (1) Red
(2) Lead minipro-J-PVC 0.40, 10 cm: (1) Black, (1) Red
(1) Tweezer Test Lead Set- 4mm P, w/PVC pouch
Specifications
|
Temperature |
-20 to +80 ºC |
|
RoHS (2002/95/EC) |
Compliant |
Rack Mount Kit
RK02
19 Inch rack mount kit for one or two half-rack B&K Precision meters and instruments. Includes only front-end hardware and is not intended to be a load-bearing piece of hardware. To support the weight of the equipment, please contact your rack manufacturer for specific supporting hardware.
Red and Black CAT III (IV) 1000V (600V) Test Leads
TL37
Right-angled sheathed banana replacement 10A test leads for digital multimeters.