Modèle 2190E

Prix: 499€ / 1 an(s) de garantie

Name Qty Last Updated
VALUETRONICS 5 2025-04-03
NEWARK 9 2025-04-03
TESTEQUITY 28 2025-04-03
FARNELL 9 2025-04-03
TME 3 2025-04-03
MOUSER ELECTRONICS 12 2025-04-02
TEST EQUIPMENT DEPOT (FOTRONIC) 9 2025-04-02
RS Americas 4 2025-04-02
RS Components 10 2025-04-02
DIGI-KEY 75 2025-04-02
DISTRELEC 2 2025-04-02

Généralités

  • Bande passante 100 MHz, 2 voies
  • Résolution verticale : 8 bits
  • Échantillonnage 1Gech/s voie et 50 Gech/s en ETS
  • Mémoire de 40K
  • 32 mesures automatiques, dont FFT, mode Go-No-Go et opérateur arithmétiques
  • Écran LCD couleur panoramique, format 16:9 (7 pouces)
  • Interfaces USB (x 2), LAN
  • Dispositif de verrouillage au poste de travail intégré au boitier
  • Rapport performances / prix inégalé
  • Boitier compact
  • Livré avec 2 sondes 1/1:10
  • Logiciel EasyscopeX (anglais)

Documents

Documentation

Logiciels

Description

Version

Téléchargement

Accessoires

PR150B

150 MHz 1x/10x Oscilloscope Probe

PR150B

  • 17/150 MHz Bandwidth
  • X1/X10 Attenuation
  • 47" (1.2m) Cable length
  • 300 V CAT II
  • Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter
  • Meets IEC61010-031 CATII

PR150B Manual

CP62

300 kHz AC/DC Oscilloscope Current Clamp Probe

CP62

The CP62 current probe allows a general purpose oscilloscope to display AC and DC current signals up to 100 A Peak (70 A RMS). The CP62 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory TL62 (BNC-to-banana) plug adapter.

  • 50 mA to 100 A peak
  • DC to 300 kHz

CP62 Manual

PR-55

High-Voltage Oscilloscope Probe, 10 kV, 40 MHz

PR-55

If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.

  • X1000 Attenuation
  • 100 Mohms / 1 pF Input Impedance
  • Up to 40 MHz Bandwidth
  • 80" (2.0m) Cable Length

Manual

PR65

30 MHz High-Voltage Differential Probe, 70 V / 700 V

PR65

The PR65 differential probe enables earth-grounded oscilloscopes to make safe and accurate floating measurements between two voltage points. This probe is compatible with B&K Precision’s oscilloscopes, as well as other major manufacturers’ (with 1 MΩ input impedance) and can be powered by batteries (included), a universal mains adapter (included), or by USB equipped oscilloscopes.

The PR65 is cTUVus certified to IEC 61010-031: 2015, for user safety and confidence.

Applications include:

  • Precision power semiconductors
  • Switch-mode power supply design
  • Floating measurements
  • Power converter measurements
  • Precision motor drive measurements

Features:

  • 30 MHz bandwidth (-3 dB)
  • Maximum 700 V differential  (DC+ AC peak)
  • 7 V output, 10x / 100x attenuation
  • 1000 V CAT III rated
  • Spring hook probes, USB cord, power adapter, and batteries included

PR67

30 MHz High Voltage Differential Probe, 140 V / 1400 V

PR67

The PR67 differential probe enables earth-grounded oscilloscopes to make safe and accurate floating measurements between two voltage points. This probe is compatible with B&K Precision’s oscilloscopes, as well as other major manufacturers’ (with 1 MΩ input impedance) and can be powered by batteries (included), a universal mains adapter (included), or by USB equipped oscilloscopes.

The PR67 is cTUVus certified to IEC 61010-031: 2015, for user safety and confidence.

Applications include:

  • Precision power semiconductors
  • Switch-mode power supply design
  • Floating measurements
  • Power converter measurements
  • Precision motor drive measurements

Features:

  • 30 MHz bandwidth (-3 dB)
  • Maximum 1400 V differential  (DC + AC peak)
  • 7 V output, 20x / 200x attenuation
  • 1000 V CAT III rated
  • Spring hook probes, USB cord, power adapter, and batteries included