Modèle 2552
2550 Series
70 MHz to 300 MHz, 2 GSa/s Digital Storage Oscilloscopes
Price: €Price not found / 3 yr Warranty
DiscontinuedMay 07, 2017
| Name | Qty | Last Updated | |
|---|---|---|---|
| SEFRAM | 2 | 2024-11-22 |
Modèles
Documents
Documentation
Logiciels
|
Description |
Version |
Téléchargement |
|---|---|---|
|
USBTMC Driver Installation Note
|
1.0
|
|
|
Operating Software (Windows 7/8.1/10)
|
1.02.01.18
|
|
|
LabVIEW 2011 Drivers
|
1.0.0
|
|
|
LabVIEW 2014 SP1 Drivers
|
1.0.0
|
|
|
Operating Software (Supports Windows(R) 7/8.1/10)
|
11April2017
|
Accessoires
200 MHz 2 kV Oscilloscope High Voltage Probe
PR2000B
If the voltages you need to measure are above the specifications of the general purpose probe, B&K Precision has higher voltage probes for you.
- X100 Attenuation
- 100 Mohms / 5 pF Input Impedance
- 200 MHz Bandwidth
- 48" (1.2m) Cable Length
High-Voltage Oscilloscope Probe, 10 kV, 40 MHz
PR-55
If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.
- X1000 Attenuation
- 100 Mohms / 1 pF Input Impedance
- Up to 40 MHz Bandwidth
- 80" (2.0m) Cable Length
USB-to-GPIB Adapter
AK40G
The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.
- Powered through USB host connector
- Cable length approximately 56 inches (143cm)
- Communication Status LED and Power LED indicators
- GPIB interface supports Device mode only (not Controller mode)