Modèle 2831E
2831E and 5491B
Multimètre de table, 20000 points, TRMS AC+DC, double affichage
Price: €460.00 / 1 yr Warranty
| Name | Qty | Last Updated | ||
|---|---|---|---|---|
| FARNELL | 5 | 2024-12-26 | ||
| DIGI-KEY | 59 | 2024-12-26 |  |
|
| TME | 2 | 2024-12-26 | ||
| DISTRELEC | 2 | 2024-12-26 | ||
| TESTEQUITY | 12 | 2024-12-26 | |
|
| NEWARK | 46 | 2024-12-26 | |
|
| MOUSER ELECTRONICS | 19 | 2024-12-25 | |
|
| RS Components | 22 | 2024-12-25 | ||
| RS Americas | 1 | 2024-12-25 | |
|
| TEST EQUIPMENT DEPOT (FOTRONIC) | 8 | 2024-12-24 | |
|
| FINAL TEST INC. | 1 | 2024-12-11 |
Généralités
- 20 000 points de mesure
- Précision de base de 0.03%
- Mesure des tensions jusqu'à 750V AC et 1000V DC
- Mesure TRMS AC + DC en tension et en courant
- Bande passante 100kHz en V AC
- Mesure des courants AC et DC jusqu'à 20A, avec calibre 2A
- Mesure de fréquence et période jusqu'à 1MHz/1µs
- Fonctions: REL, Max/Min, dBm, dB, %, Hold, Compare
- Mode Limites pour comparaison PASS/FAIL
- Double affichage: 2 mesures affichées simultanément
- Interface USB
- Programmation compatible SCPI
- Sécurité: CAT I 1000V et CAT II 300V
Modèles
Documents
Documentation
Logiciels
|
Description |
Version |
Téléchargement |
|---|---|---|
|
USB Virtual COM Drivers (Supports Windows 10/11)
|
V11.3.0
|
|
|
LabVIEW 2011 Drivers
|
1.0
|
|
|
LabVIEW 2014 SP1 Drivers
|
1.0
|
|
|
Operating Software (Supports Windows(R) 7/10)
|
V1.0.3
|
Accessoires
Rack Mount Kit
RK02
19 Inch rack mount kit for one or two half-rack B&K Precision meters and instruments. Includes only front-end hardware and is not intended to be a load-bearing piece of hardware. To support the weight of the equipment, please contact your rack manufacturer for specific supporting hardware.
High Performance Bench DMM Accessory Kit
TL500B
This kit of accessories was assembled to facilitate requirements by high-performance bench digital multimeters (DMM's) users. All the most popular accessories in one kit. The kit offers MiniProbe test probe, with spring-loaded tips, for fine probing; MiniPRO Test Clips for small and MiniFlex Test Clips for micro connections; and for those larger test points, both spade lug and banana plug adapters, two pairs of test leads for 4-wire measurements or calibration hookups, an insulated BNC male to sheathed banana jack adapter, and an insulated SMD Tweezer set for surface-mount component testing.
- Silicone jacketed test lead wire with UL Listing
- MiniProbes w/Spring loaded Stainless Steel Tips
- Packaged in Plastic Case
Kit Contains:
(4) Test Lead 4mm Sheathed P-RaP Silicon 0.75, 40": (2) Black, (2) Red
(2) Spring Tip Mini-Probe-4mm Jack: (1) Black, (1) Red
(1) Insulated BNC male Adapt-4mm Safety Jacks
(2) Adapter 4mm Banana Plug to Jack: (1) Black, (1) Red
(2) Mini Flex Clip-4mm Jack-Silicon 0.40, 10 cm: (1) Black, (1) Red
(2) Adapter 6mm Spade 4mm-Jack: (1) Black, (1) Red
(2) Lead minipro-J-PVC 0.40, 10 cm: (1) Black, (1) Red
(1) Tweezer Test Lead Set- 4mm P, w/PVC pouch
Specifications
|
Temperature |
-20 to +80 ºC |
|
RoHS (2002/95/EC) |
Compliant |
Red and Black CAT III (IV) 1000V (600V) Test Leads
TL37
Right-angled sheathed banana replacement 10A test leads for digital multimeters.