Model 4055
4050 Series
50 MHz Dual Channel Function/Arbitrary Waveform Generator
Price: $895 / 3 yr Warranty
DiscontinuedMar 28, 2017
| Name | Qty | Last Updated | |
|---|---|---|---|
| RS Components | 1 | 2024-11-14 |
Overview
The 4055 has been replaced by the: 4055B
The 4050 Series Dual Channel Function/Arbitrary Waveform Generators are capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms. With easy-to-read color displays and an intuitive user interface with numeric keypad, these instruments offer plenty of features including linear/logarithmic sweep, built-in counter, extensive modulation and triggering capabilities, a continuously variable DC offset, and a high performance 14-bit, 125 MSa/s arbitrary waveform generator. The main output voltage can be varied from 0 to 10 Vpp into 50 ohms (up to 20 Vpp into open circuit) and the secondary output can be varied from 0 to 3 Vpp into 50 ohms (up to 6 Vpp into open circuit).
- 14-bit, 125 MSa/s, 16k point arbitrary waveform generator
- Large 3.5-inch LCD color display with waveform preview
- Linear and logarithmic sweep
- AM/DSB-AM/ASK/FM/FSK/PM/PWM modulation functions
- Variable DC offset
- Adjustable duty cycle
- Two independent channels with individual output On/Off buttons
- Internal/external triggering
- Gate and burst mode
- 48 built-in predefined arbitrary waveforms
- Store/recall up to 10 instrument settings and 10 arbitrary waveforms
- Built-in counter
- USB device port (USBTMC-compliant) with front panel USB host port
- GPIB connectivity with optional USB-to-GPIB adapter (model AK40G)
- SCPI-compliant command set
- Short circuit protection on outputs
- LabVIEW drivers available
Documents
Documentation
Software
|
Description |
Version |
Download |
|---|---|---|
|
USBTMC Driver Installation Note
|
1.0
|
|
|
Operating Software (Supports Windows(R) 7/8.1/10)
|
11April2017
|
|
|
Operating Software (Supports Windows(R) 7/8.1)
|
1.1.1.27
|
|
|
LabVIEW 2013 SP1 Drivers
|
1.0.1
|
Accessories
USB-to-GPIB Adapter
AK40G
The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.
- Powered through USB host connector
- Cable length approximately 56 inches (143cm)
- Communication Status LED and Power LED indicators
- GPIB interface supports Device mode only (not Controller mode)
- MSRP: $229
BNC Breakout to Alligator Clips
CC-21
Standard BNC to Alligator clips test leads.
- 50 ohm impedance
- RG58C/u cable
- 500Vrms voltage rating
- 40" cable length
- MSRP: $14
Function Generator Test Leads Set
TLFG
General purpose test probe set that includes BNC to BNC cables, BNC adapters and test clips.
- MSRP: $122